MIDICLOCK can be used for synchronization of MIDI devices. The BPM rate of the clock signal can be set, and the MIDI real time clock protocol is sent out with the precision of the Windows multimedia timer.The clock signal can be started/stopped/adjusted by pressing keys or sendingMIDI-IN patch change commands.HINTS:------ 1. MIDIClock can be used to synchronize multiple sequencers/synths. You can do this using MIDIYoke. Connect MIDIClock to MIDIYoke Junction 1 output. As MIDIYoke is a multiclient driver, you can connect multiple sequencers/synths (such as rebirth, AN1x,...) to MIDIYoke Junction 1 MIDI input. 2. Send the desired patch change to the program''s selected midi in. Adjust to the according tempo, press apply. The program change message is now linked to the tempo. Midi channels are numbered from 0 to 15. Program numbers from 0 to 127. Don''t forget to push Ctrl Alt s if you wish to save your settings. It saves into clockpresets.ini. You can edit clockpresets.ini file too : the BPMPRESETS section contains all tempo settings. Special codes for BPM presets (only usable by editing the ini file) : 0 = not used. 10001 = start-stop 10002 = pause 10003 = continue