DVD Copier is a program for Windows that allows you to grab data DVDs HD DVDs Video DVDs and Blu-ray disks (ISO) containing any type of files into a blank DVDV disc or to an Image file (like ISO format). It grabs any type of DVD. SPTI (SCSI Pass through Interface) and ASPI (Advanced SCSI Programming Interface) device access are supported which allows grabbing on all versions of Windows. DVD Copier can copy DVD directly to another blank DVD and copy DVD to an image file in your local drive. It burns DVD image file from your local hard drive to a blank DVD erase Erasable DVD discs in Full and Quick modes and Fully ISO compliant data DVDs HD DVDs and Blu-ray disks with Joliet extension. The System Requirements are: 1. Windows NT4/95/98/2000/Me/XP/2003/Vista 2. Pentium with at least 16MB RAM (32MB for 2000/XP) 3. DVD-R or DVD -RW drive. To copy from DVD disc to DVD disc from the read drive combo select the DVD-R drive which you will put the source DVD in. then put the DVD disc that you want to copy. From the write drive combo box select the DVD-RW drive that you will burn the blank DVD disc with. Then insert a blank Recordable DVD (any type) to copy the source DVD into. To copy from DVD disc to image file From the read drive combo select the DVD-R drive which you will put the source DVD in then put the DVD disc that you want to copy. You can ignore bad blocks while copying by checking the "Ignore bad blocks" check box. From the write drive combo box select the "Image Writer". You can specify the output image file. To burn Image File to DVD disc from the read drive combo select the "Image File" item. An "Input Image File Path" button will appear. Click the "Input Image File Path" button to specify the input image file that will be burned out. From the write drive combo box select the DVD-RW drive that you will burn the blank DVD disc with. Then insert a blank Recordable DVD to copy the source DVD into. Click the "Copy" button to start the burn process.